Template:Infobox military conflict/doc

From Minecraftia Wiki

Usage

Battle of Lützen
Part of the Thirty Years' War
Battle of Lutzen
The Battle of Lützen by Carl Wahlbom shows the death of King Gustavus Adolphus on 16 November 1632.
Date6 November (O.S.) or 16 November (N.S.), 1632
LocationNear Lützen, southwest of Leipzig
(present-day Germany)

Lua error: callParserFunction: function "#coordinates" was not found.
Result Swedish Pyrrhic victory
Belligerents
Sweden Sweden
Protestant Union

File:Banner of the Holy Roman Emperor (after 1400).svg Holy Roman Empire

Commanders and leaders

Sweden Gustavus Adolphus 

Electorate of Saxony Bernhard of Saxe-Weimar

Sweden Robert Munro, 18th Baron of Foulis

Holy Roman Empire Albrecht von Wallenstein

Holy Roman Empire Count Gottfried zu Pappenheim (DOW)
Strength
12,800 infantry
6,200 cavalry
60 guns
10,000 infantry
7,000 cavalry, plus 3,000 infantry and 2,000 cavalry on arrival
24 guns
Casualties and losses
3,400 dead and 1,600 wounded or missing Probably about the same as Swedish casualties

A military conflict infobox (sometimes referred to as a warbox) may be used to summarize information about a particular military conflict (a battle, campaign, war, or group of related wars) in a standard manner.

The infobox should be added using the {{infobox military conflict}} template, as shown below:

{{Infobox military conflict
| conflict    = 
| width       = 
| partof      = 
| image       = 
| caption     = 
| date        = 
| place       = 
| coordinates = 
| map_type    = 
| map_relief  = 
| latitude    = 
| longitude   = 
| map_size    = 
| map_marksize = 
| map_caption = 
| map_label   = 
| territory   = 
| result      = 
| status      = 
| combatants_header = 
| combatant1  = 
| combatant2  = 
| combatant3  = 
| commander1  = 
| commander2  = 
| commander3  = 
| units1      = 
| units2      = 
| units3      = 
| strength1   = 
| strength2   = 
| strength3   = 
| casualties1 = 
| casualties2 = 
| casualties3 = 
| notes       = 
| campaignbox = 
}}

Note: When using parameters, avoid the ambiguous abbreviation "N/A", and instead use "unknown" or "none". All subjective or qualitative judgements and numerical quantities or statistics must be cited to a reliable source (see WP:MILMOS#CITE).

Parameters

  • conflict – the name of the conflict being described (e.g. "Battle of Lützen" or "World War I").
  • width - optional - the width of the infobox, e.g. "400px"; defaults to: "315px".
  • partofoptional – the larger conflict containing the event described in the article. For battles or campaigns, this should be the war during which the event takes place; for particularly large wars, this may include a theatre (e.g. "the Eastern Front of World War II"). For wars, the parameter may be used to link to a larger group of wars (e.g. the Italian War of 1521–26 to the Italian Wars). It may be necessary to insert "the" before the name of the war for proper grammar.
  • imageoptional – an image for the warbox. The image must be given in the form [[File:Example.jpg|300px|alt=Example alt text]]; in particular, the thumb attribute must not be selected.
  • image_sizeoptional – a size for the image.
  • captionoptional – the text to be placed below the image.
  • dateoptional – the date of the conflict described. Convention is to give the actual date for battles and the years for wars, but this does not always apply.
  • place – the location of the conflict. For conflicts covering a wide area, a general description (e.g. "France", or "Europe", or "Worldwide") may be used.
  • coordinatesoptional – the location of the structure, given as a coordinate pair by using {{coord}} with display=inline,title.
  • map_typeoptional – the base map to be used for the location map, e.g. "Scotland"; see {{location map}} for more details.
  • map_reliefoptional – "yes" if the location map is a relief map; see {{location map}} for more details.
  • latitudeoptional – latitude for placing the marker on the location map, e.g. "56.81".
  • longitudeoptional – longitude for placing the marker on the location map, e.g. "-2.68".
  • map_sizeoptional – width of the location map in pixels (px), e.g. "150"; defaults to: "220".
  • map_markoptional – the name of a file to use as the location map marker, e.g. Green_pog.svg; defaults to: "Red_pog.svg".
  • map_marksizeoptional – width of the location map marker in pixels (px), e.g. "10"; defaults to: "8".
  • map_captionoptional – caption displayed below the location map; defaults to "Location within {{{map_type}}}", e.g. "Location within Scotland".
  • map_labeloptional – the label placed next to the marker on the location map.
  • territoryoptional – any changes in territorial control as a result of the conflict; this should not be used for overly lengthy descriptions of the peace settlement.
  • actionoptional – In case of Coup d'État, short description of modus operandi, e.g. "...marched over the city...", "...dissolving the Congress of the Republic...", "...take the government hostage ...", "...put the country under military control ...", etc.
  • resultoptional – this parameter may use one of several standard terms: "X victory", "Decisive X victory" or "Inconclusive". The choice of term should reflect what the sources say. In cases where the standard terms do not accurately describe the outcome, a link to the section of the article where the result is discussed in detail (such as "See the 'Aftermath' section") should be used instead of introducing non-standard terms like "marginal" or "tactical" or contradictory statements like "decisive tactical victory but strategic defeat". It is better to omit this parameter altogether than to engage in speculation about which side won or by how much.
  • statusoptional – for ongoing conflicts, the current status of the conflict. This should not be used if a final result (above) is provided.
  • combatants_headeroptional – sets the header text for the combatants section. Default is "Belligerents". In case of Coup d'État, use "Government-Insurgents   "
  • combatant1/combatant2/combatant3optional – the parties participating in the conflict. This is most commonly the countries whose forces took part in the conflict; however, larger groups (such as alliances or international organizations) or smaller ones (such as particular units, formations, or groups) may be indicated if doing so improves reader understanding. When there is a large number of participants, it may be better to list only the three or four major groups on each side of the conflict, and to describe the rest in the body of the article. The combatant3 field may be used if a conflict has three distinct "sides", and should be left blank on other articles. Combatants should be listed in order of importance to the conflict, be it in terms of military contribution, political clout, or a recognized chain of command. If differing metrics can support alternative lists, then ordering is left to the editors of the particular article.
    • combatant1a/combatant2a/combatant3aoptional – in cases where the parties significantly changed over the course of the conflict, these subsidiary fields may be used to provide additional rows for the combatantN fields (above).
    • combatant1b/combatant2b/combatant3boptional – additional row, as above.
    • combatant1c/combatant2c/combatant3coptional – additional row, as above.
    • combatant1d/combatant2d/combatant3doptional – additional row, as above.
  • commander1/commander2/commander3optional – the commanders of the military forces involved. For battles, this should include military commanders (and other officers as necessary). For wars, only prominent or notable leaders should be listed, with an upper limit of about seven per combatant column recommended. Ranks and position titles should be omitted. The {{KIA}} and {{POW}} templates may be included immediately after the names of commanders who were killed in action or surrendered and were taken prisoner, respectively. The commander3 field can only be used if the combatant3 field is set.
  • units1/units2/units3optional – the units or formations involved. If a large number of distinct formations is present, it may be better to reference an order of battle in the body of the article than to include the entire list in this field. The units3 field can only be used if the combatant3 field is set.
  • strength1/strength2optional – the numerical strength of the units involved.
  • polstrength1/polstrength2optional – In case of Coup d'Etat, political organizations that supported the government (1) respective the insurgents (2).
  • milstrength1/milstrength2optional – In case of Coup d'Etat, military units that supported the government (1) respective the insurgents (2).
  • strength3optional – if combatant3 is set, this is a third strength field identical to the two above; if it is not set, this is an alternate combined field for use where only the total participation in a conflict is known.
  • casualties1/casualties2optional – casualties suffered, including dead, wounded, missing, captured, and civilian deaths. Terms such as "dead" (or "killed"), "wounded", or "captured" should be used in place of abbreviations such as "KIA" or "POW".
  • casualties3optional – if combatant3 is set, this is a third casualty field identical to the two above; if it is not set, this is an alternate combined field for use where only the total casualties of a conflict are known, or where civilian casualties cannot be directly attributed to either side.
  • notesoptional – optional field for further notes; this should only be used in exceptional circumstances.
  • campaignboxoptional – optional field for appending a campaignbox template to the bottom of the infobox, which allows both boxes to float as a single element (useful if there are subsequent left floating images, which would otherwise not be able to float above the campaign box); the template must be specified in the format {{Campaignbox XYZ}}.

Campaignboxes

One common type of navigational template in articles concerning conflicts, wars and related topics is the campaignbox template, intended to provide context and convenient navigation among articles on the battles in a campaign, front, theater or war (or, more rarely, among several campaigns or wars).

If the article includes an infobox, the campaignbox/es are usually placed immediately after it (i.e. just below it). If available, as with infoboxes such as {{Infobox military conflict}}, use the infobox's |campaignbox= parameter:

{{Infobox military conflict
...
}}
{{Campaignbox XXXX}}
or

{{Infobox military conflict ... | campaignbox = {{campaignbox XXXX}} }}

Articles may include multiple campaignboxes; typically, these are stacked under the infobox. The most common scenario occurs when two levels of campaignboxes are present – for example, an article about a battle can include both a campaignbox listing the battle itself and an "enclosing" campaignbox listing the campaign, theater or war during which the battle took place. Similarly, an article about a war can include both a campaignbox listing the war (among a series of wars) and a campaignbox for the war itself, listing the battles that took place during it.

Creating campaignboxes

Existing campaignboxes may be viewed through the Campaignbox template category to which campaignboxes are added automatically. If a new campaignbox becomes necessary, it should be named Template:Campaignbox XXXX (where XXXX is the (shortened) name of the campaign) and should use {{Campaignbox}} thus:

{{Campaignbox
| name = 
| title = 
| battles = 
| notes = 
}}
Parameters
name
The name by which Wikipedia refers to the template, i.e. "Template:Campaignbox XXXX". This can be produced by using {{subst:PAGENAME}}.
title
The name of the campaign or war, which, if an article about the campaign or war exists, should link to it. Dates should not be indicated unless needed for clarity. Note that long links may cause alignment problems; see the troubleshooting guide for more information.
battles
A chronological list of battles and operations in the campaign, linked as [[Battle of YYYY|YYYY]]. A convenient and accessible way to separate the items in the list is to add | listclass = hlist and then use the standard * (asterisk)-based listing format.
notes
(optional) Any explanatory notes needed to clarify the list. This option should be used sparingly.
(raw_name)
(optional; deprecated) This parameter overrides the use of the title in determining the template name and exists for the sake of backward compatibility. When creating a new campaignbox, both title and name should be specified as above and this parameter omitted.

The following optional parameters are passed on to the templates {{Military navigation}} or {{Navbox}} used to create campaignboxes and so can affect their styling. See these two templates' documentation pages for further details.

state
To set whether the campaignbox appears fully visible or collapsed (to titlebar only) when it is first presented by a page.
bodyclass
CSS styling to affect the whole template.
listclass
CSS styling to affect the list of battles, operations, etc. (e.g. to affect |battles=).

The use of special formatting (such as bolding or changes in font size) in the list of battles – particularly to mark battles as "important" – is generally discouraged; while there are a few cases where such approaches may be both helpful to the reader and sufficiently well-sourced that they do not constitute original research, they are usually both unnecessary and potentially confusing. Similarly, dividing the list of battles into multiple blocks by inserting heading-like separations should be exceptional; if such a division is felt to be needed, a better solution may be to split the one campaignbox into two or more.


This infobox may be used to describe a particular planned or executed military operation or attack. For operations that resulted in combat, it can be used as an auxiliary template to the {{Infobox military conflict}}, if necessary; for other types of operations, including those that were planned but never executed, it may be used alone. In the case of conflicts that consisted of multiple independent operations, multiple copies of the box may be used on a single article.

{{{title}}}
Part of {{{conflict}}}
[[File:{{{image}}}|{{{image_size}}}|alt={{{alt}}}|upright={{{image_upright}}}|{{{alt}}}]]
{{{caption}}}
Lua error in Module:Location_map at line 353: Malformed coordinates value.
Operational scope {{{scope}}}
Location {{{location}}}
Lua error: callParserFunction: function "#coordinates" was not found.
Planned {{{planned}}}
Planned by {{{planned_by}}}
Commanded by {{{commanded_by}}}
Target {{{target}}}
Date {{{executed}}}
{{{time}}}
{{{time-begin}}} – {{{time-end}}} ({{{timezone}}})
Executed by {{{instigator}}}
Outcome {{{outcome}}}
Casualties {{{casualties}}}
{{Infobox operational plan
| name         = 
| partof       =
| image        = 
| caption      = 
| scope        =
| type         =
| location     =
| coordinates  = 
| map_type     = 
| map_size     = 
| map_caption  = 
| map_label    = 
| planned      = 
| planned_by   = 
| commanded_by = 
| objective    = 
| target       =
| date         = <!-- {{Start date|YYYY|MM|DD|df=y}} --> 
| time         =
| time-begin   =
| time-end     =
| timezone     =
| executed_by  = 
| outcome      = 
| casualties   = 
| fatalities   =
| injuries     =
}}

Example

Case Blue
Fall Blau
Operational scope Strategic offensive
Planned by Wehrmacht
Objective Capture the oil fields of the Caucasus
Date Began June 28, 1942 (1942-06-28)
Executed by Army Group South
{{Infobox operational plan
| name         = Case Blue<br />''Fall Blau''
| scope        = Strategic offensive
| planned      =
| planned_by   = Wehrmacht
| objective    = Capture the oil fields of the [[Caucasus]]
| executed     = Began {{Start date|1942|06|28}} 
| executed_by  = [[Army Group South]]
| outcome      =
| casualties   = 
}}

Parameters

Note: When using parameters, avoid the ambiguous abbreviation "N/A", and instead use "unknown" or "none". All subjective or qualitative judgements and numerical quantities or statistics must be cited to a reliable source (see WP:MILMOS#CITE).

  • name – the name of the operational plan; names in multiple languages may be provided.
  • partofoptional – the larger conflict containing the event described in the article.
  • imageoptional – an image. The image must be given in the form [[Image:Example.jpg|300px|alt=Example alt text]]; in particular, the thumb attribute must not be selected.
  • captionoptional – the text to be placed below the image.
  • locationoptional – the location of the operation.
  • coordinatesoptional – the coordinates for the location above, given as {{coord}} with |display=inline,title.
  • map_typeoptional – the base map to be used for the location map, e.g. "Scotland"; see {{location map}} for more details.
  • map_sizeoptional – width of the location map in pixels (px), e.g. "150"; defaults to: "220".
  • map_captionoptional – caption displayed below the location map; defaults to "Location within {{{map_type}}}", e.g. "Location within Scotland".
  • map_labeloptional – the label placed next to the marker on the location map.
  • scopeoptional – the scope of the operation, such as "Strategic", "Operational", or "Tactical".
  • typeoptional – as an alternative to the scope field above, the type of operation, such as "Suicide attack" or "Ambush".
  • plannedoptional – the date(s) on which the plan was developed.
  • planned_byoptional – the person or group responsible for developing the plan.
  • commanded_byoptional – the person commanding the operation.
  • objectiveoptional – the objective(s) of the operation.
  • targetoptional – as an alternative to the objective field above, the target(s) of the operation.
  • dateoptional – the date(s), if any, on which the operation was executed. use {{Start date}} (and {{End date}} if required)
  • timeoptional – the time, if any, at which the operation was executed.
  • time-begin and time-endoptional – as an alternative to the time field above, the start and end times, respectively.
  • timezoneoptional – the timezone of the location of the operation; UTC+X, UTC-X, or UTC (i.e. offset from UTC) is preferred.
  • executed_byoptional – the people, groups, units, or formations responsible for executing the operation.
  • outcomeoptional – the outcome of the operation from the perspective of the planners.
  • casualtiesoptional – any casualties occurring during the execution of the operation.
  • fatalitiesoptional – as an alternative to the casualties field above, the number of fatalities occurring during the execution of the operation.
  • injuriesoptional – as an alternative to the casualties field above, the number of injuries occurring during the execution of the operation.

Microformat

The HTML mark-up produced by this template includes an hCalendar microformat that makes event details readily parsable by computer programs. This aids tasks such as the cataloguing of articles and maintenance of databases. For more information about the use of microformats on Wikipedia, please visit the Microformat WikiProject.

Classes used

The HTML classes this microformat uses include:

  • attendee
  • contact
  • description
  • dtend
  • dtstart
  • location
  • organiser
  • summary
  • url
  • vevent
Please do not rename or remove these classes
nor collapse nested elements which use them.

Tracking category

See also


Microformat

The HTML markup produced by this template includes an hCalendar microformat, which makes the event details parsable by computers, either acting automatically to catalogue article across Wikipedia, or via a browser tool operated by a person, to (for example) add the subject to a calendar or diary application. Within the hCalendar is a Geo microformat, which additionally makes the coordinates (latitude & longitude) parsable, so that they can be, say, looked up on a map, or downloaded to a GPS unit. For more information about the use of microformats on Wikipedia, please see the microformat project.

Dates will only be included if you use {{Start date}} or {{End date}} (use the former for single dates, but do not use any of these if the date is before 1583 CE). {{End date}} requires that a time be specified, but display of this time may be suppressed by adding |nodate=yes to the end.

To include a URL, use {{URL}}.

hCalendar uses HTML classes including:

  • attendee
  • dtend
  • dtstart
  • location
  • summary
  • url
  • vevent

Geo is produced by calling {{coord}}, and uses HTML classes:

  • geo
  • latitude
  • longitude

Please do not rename or remove these classes nor collapse nested elements which use them.
Also, when giving coordinates, please don't be overly precise.


TemplateData

This is the TemplateData documentation for this template used by VisualEditor and other tools.

See the monthly error report for this template.

TemplateData for Infobox military conflict

Summarize information about a particular military conflict (a battle, campaign, war, or group of related wars).

Template parameters

This template prefers block formatting of parameters.

ParameterDescriptionTypeStatus
Conflictconflict

The name of the conflict being described.

Linerequired
Widthwidth

Width of the infobox.

Default
315px
Stringoptional
Part ofpartof

The larger conflict containing the event described in the article.

Page nameoptional
Imageimage

An image for the warbox given in the form Example.jpg.

Stringoptional
Image sizeimage_size

The size of the image

Stringoptional
Captioncaption

The text to be placed below the image.

Stringoptional
Datedate

The date of the conflict described. Convention is to give the actual date for battles and the years for wars, but this does not always apply.

Stringoptional
Placeplace

The location of the conflict.

Stringrequired
Coordinatescoordinates

The location of the structure, given as a coordinate pair by using {{coord}} with display=inline,title.

Stringoptional
Map Typemap_type

The base map to be used for the location map, e.g. "Scotland"; see {{location map}} for more details.

Stringoptional
Map Reliefmap_relief

"yes" if the location map is a relief map.

Stringoptional
Latitudelatitude

Latitude for placing the marker on the location map.

Numberoptional
Longitudelongitude

Longitude for placing the marker on the location map.

Numberoptional
Map Sizemap_size

Width of the location map in pixels (px).

Default
220
Numberoptional
Map Markermap_mark

File to use as the location map marker.

Default
red_pog.svg
Stringoptional
Map Marker Sizemap_marksize

Width of the location map marker in pixels (px).

Default
8
Numberoptional
Map Captionmap_caption

Caption displayed below the location map.

Default
Location within {{{map_type}}}
Stringoptional
Map Labelmap_label

The label placed next to the marker on the location map.

Lineoptional
Territoryterritory

Any changes in territorial control as a result of the conflict; this should not be used for overly lengthy descriptions of the peace settlement.

Stringoptional
Resultresult

this parameter may use one of several standard terms: "X victory", "Decisive X victory" or "Inconclusive". The choice of term should reflect what the sources say. In cases where the standard terms do not accurately describe the outcome, a link to the section of the article where the result is discussed in detail (such as "See the 'Aftermath' section") should be used instead of introducing non-standard terms like "marginal" or "tactical" or contradictory statements like "decisive tactical victory but strategic defeat". It is better to omit this parameter altogether than to engage in speculation about which side won or by how much.

Lineoptional
Statusstatus

For ongoing conflicts, the current status of the conflict.

Lineoptional
"Combatants" Header Textcombatants_header

Sets the header text for the combatants section.

Default
Belligerents
Lineoptional
Combatant 1combatant1

A party participating in the conflict.

Stringoptional
Combatant 2combatant2

A party participating in the conflict.

Stringoptional
Combatant 3combatant3

A party participating in the conflict. (only if the conflict has three distinct "sides")

Stringoptional
Combatant 1acombatant1a

In cases where the parties significantly changed over the course of the conflict, this field may be used to provide additional rows for the Combatant 1 field.

Stringoptional
Combatant 2acombatant2a

In cases where the parties significantly changed over the course of the conflict, this field may be used to provide additional rows for the Combatant 2 field.

Stringoptional
Combatant 3acombatant3a

In cases where the parties significantly changed over the course of the conflict, this field may be used to provide additional rows for the Combatant 3 field.

Stringoptional
Combatant 1bcombatant1b

In cases where the parties significantly changed over the course of the conflict, this field may be used to provide additional rows for the Combatant 1 field.

Stringoptional
Combatant 2bcombatant2b

In cases where the parties significantly changed over the course of the conflict, this field may be used to provide additional rows for the Combatant 2 field.

Stringoptional
Combatant 3bcombatant3b

In cases where the parties significantly changed over the course of the conflict, this field may be used to provide additional rows for the Combatant 3 field.

Stringoptional
Combatant 1ccombatant1c

In cases where the parties significantly changed over the course of the conflict, this field may be used to provide additional rows for the Combatant 1 field.

Stringoptional
Combatant 2ccombatant2c

In cases where the parties significantly changed over the course of the conflict, this field may be used to provide additional rows for the Combatant 2 field.

Stringoptional
Combatant 3ccombatant3c

In cases where the parties significantly changed over the course of the conflict, this field may be used to provide additional rows for the Combatant 3 field.

Stringoptional
Combatant 1dcombatant1d

In cases where the parties significantly changed over the course of the conflict, this field may be used to provide additional rows for the Combatant 1 field.

Stringoptional
Combatant 2dcombatant2d

In cases where the parties significantly changed over the course of the conflict, this field may be used to provide additional rows for the Combatant 2 field.

Stringoptional
Combatant 3dcombatant3d

In cases where the parties significantly changed over the course of the conflict, this field may be used to provide additional rows for the Combatant 3 field.

Stringoptional
Commander of Combatant 1commander1

The commanders of the military forces of Combatant (1) involved.

Stringoptional
Commander of Combatant 2commander2

The commanders of the military forces of Combatant 2 involved.

Stringoptional
Commander of Combatant 3commander3

The commanders of the military forces of Combatant 3 involved.

Stringoptional
Units of Combatant 1units1

The units or formations of Combatant 1 involved. If a large number of distinct formations is present, it may be better to reference an order of battle in the body of the article than to include the entire list in this field.

Stringoptional
Units of Combatant 2units2

The units or formations of Combatant 2 involved. If a large number of distinct formations is present, it may be better to reference an order of battle in the body of the article than to include the entire list in this field.

Stringoptional
Units of Combatant 3units3

The units or formations of Combatant 3 involved. If a large number of distinct formations is present, it may be better to reference an order of battle in the body of the article than to include the entire list in this field.

Stringoptional
Strength of Combatant 1strength1

The numerical strength of Combatant 1.

Stringoptional
Strength of Combatant 2strength2

The numerical strength of Combatant 2.

Stringoptional
Strength of Combatant 3strength3

If Combatant 3 is set, this field is for the numerical strength of Combatant 3. If Combatant 3 is not set, this is an alternate combined field for use where only the total participation in a conflict is known.

Stringoptional
Casualties of Combatant 1casualties1

Casualties suffered by Combatant 1, including dead, wounded, missing, captured, and civilian deaths. Terms such as "dead" (or "killed"), "wounded", or "captured" should be used in place of abbreviations such as "KIA" or "POW".

Stringoptional
Casualties of Combatant 2casualties2

Casualties suffered by Combatant 2, including dead, wounded, missing, captured, and civilian deaths. Terms such as "dead" (or "killed"), "wounded", or "captured" should be used in place of abbreviations such as "KIA" or "POW".

Stringoptional
Casualties of Combatant 3casualties3

If Combatant 3 is set, this field is for the casualties suffered by Combatant 3, including dead, wounded, missing, captured, and civilian deaths. Terms such as "dead" (or "killed"), "wounded", or "captured" should be used in place of abbreviations such as "KIA" or "POW". If combatant3 is not set, this is an alternate combined field for use where only the total casualties of a conflict are known, or where civilian casualties cannot be directly attributed to either side.

Stringoptional
Notesnotes

Optional field for further notes; this should only be used in exceptional circumstances.

Stringoptional
Campaignboxcampaignbox

Optional field for appending a campaignbox template to the bottom of the infobox, which allows both boxes to float as a single element (useful if there are subsequent left floating images, which would otherwise not be able to float above the campaign box); the template must be specified in the format {{Campaignbox XYZ}}.

Stringoptional

See also